Installare la lampadina LED la lampada.
Attivare Mini Remote facendo scorrere l'interruttore di alimentazione verso destra.
Premere e tenere premuto il tasto desiderato Mini Remote fino a quando non emette un segnale acustico.
Accendere il lampada. Se si spegne il lampada, non sarà in grado di controllare la lampadina.
Ripetere i passaggi da uno a quattro per la seconda lampadina LED.
Instalar el bulbo del LED en la lámpara.
Girar Mini remoto deslizando el interruptor de encendido hacia la derecha.
Mantenga oprimida la tecla deseada del Mini Remoto hasta que suene.
Encienda el aparato de luz. Si se apaga el aparato de luz, usted no será capaz de controlar la bombilla.
Repita los pasos uno a cuatro para la segunda bombilla LED.
Installez la lampe LED dans le luminaire.
Tournez Mini à distance en faisant glisser l'interrupteur d'alimentation vers la droite.
Appuyez et maintenez enfoncé le bouton souhaité sur Mini Remote jusqu'à ce qu'il sonne.
Allumez votre luminaire. Si vous éteignez votre appareil d'éclairage, vous ne serez pas en mesure de contrôler l'ampoule.
Répétez les étapes un à quatre pour la deuxième ampoule LED.
Setzen Sie die Lampe in die Lampe ein.
Schalten Sie Mini Remote auf, indem Sie den Netzschalten nach rechts schieben.
Halten Sie die gewünschte Taste auf Mini Remote, bis es piept.
Schalten sie die Lampe ein. Ob Sie die Lampe ausschalten, kann man die Lampe nicht kontrollieren.
Wiederholen Sie die Schritte eins bis vier für das zweite Lampe.
Coupez l'alimentation électrique au panneau de service et retirer l'interrupteur mural existant.
Déplier tous les fils à l'intérieur du boîtier de jonction. Séparer les fils noirs et les plafonner avec des noix de fil.
Mise sous tension et utiliser un détecteur de tension pour identifier le fil conducteur; ceci est votre fil de ligne.
Coupez l'alimentation et connecter les fils correspondants de la boîte de jonction avec le mur Insteon Mettre un bouchon avec les écrous de fil.
Installer commutateur Insteon mur, fixez la plaque murale et mettez sous tension.
Suivez les instructions à l'écran dans l'application Insteon ajouter Dimmer Switch.
Ne raccordez que les ampoules à incandescence à gradateur (2-Fil).
Commutateur gradateur (2-Fil) est en mesure d'éviter le besoin d'un fil neutre en remplissant un circuit électrique à travers la charge connectée. Ampoules qui incluent une alimentation électrique comme les ampoules LED et de la LCF peuvent émettre une lumière douce, même lorsque l'interrupteur est éteint.
Turn off power at the service panel and remove the existing wall switch.
Unfold all of the wires from within the junction box. Separate the black wires and cap them with wire nuts.
Turn on power and use a voltage detector to identify the live wire; this is your line wire.
Turn off power and connect the corresponding wires from the junction box with the Insteon Wall Switch an cap them with wire nuts.
Install Insteon Wall Switch, attach the wall plate and turn on power.
Follow the on-screen instructions in the Insteon app to add Dimmer Switch.
Due to how this dimmer is able to work using only 2 wires, it is only recommended to use incandescent bulbs.
Dimmer Switch (2-Wire) is able to avoid need of a neutral wire by completing an electrical circuit through the connected load. Bulbs that include a power supply like LED and CFL bulbs may emit a soft glow even when the switch is turned off. However, we have seen applications where dimmable LED bulbs do function with this switch. Typically higher quality LED bulbs and more than one being controlled.
Amazon Alexa supports control of several different Insteon Thermostats; you can increase or decrease the temperature and change modes just by asking Alexa. Use the information in this article to identify if you have a compatible Insteon Thermostat.
If you have a supported Thermostat and your Amazon Alexa was configured prior to 18 March 2016, you may need to re-run discovery to identify your Insteon Thermostat. Simply say, "Alexa, discover my devices." Your Amazon Alexa should find your Insteon Thermostats and enable voice control.
These Insteon Thermostats are compatible with Amazon Alexa and allow full voice control functionality of setting temperature and changing modes.
Insteon Wired Thermostat
These Insteon Thermostats are not explicitly incompatible with Amazon Alexa but are not guaranteed to function as expected.
Insteon Thermostat for Heat Pumps
These Insteon Thermostats are incompatible with Amazon Alexa and cannot be controlled.
Insteon Wired Thermostat
Insteon Wireless Thermostat
Insteon Venstar Thermostat Adapter
Insteon Venstar Integrated Thermostat
Use this article to determine if your Insteon device can communicate with other Insteon devices via powerline-only, RF-only or powerline and RF (dual-band).
| Powerline | RF | |||
| Dimmer Module | 2456D3 |  |
- | |
| 2457D2X | |
- | ||
| 2457D2 | |
|
||
| On/Off Module | 2456S3 | |
- | |
| 2635-222 | |
|
||
| Outdoor On/Off Module | 2456S3E | |
- | |
| 2634-222 | |
|
||
| LED Bulb | 2672-222 | |
|
|
| LED Bulb for Recessed Lights | 2674-222 | |
|
|
| i3 Paddle | PS01 | |
|
|
| i3 Dial | DS01 | |
|
|
| Dimmer Switch | 2476D | |
- | |
| 2477D | |
|
||
| Dimmer Switch (1000W) | 2476DH | |
- | |
| 2477DH | |
|
||
| Dimmer Switch (2-Wire) | 2474DWH | - | |
|
| On/Off Switch | 2476S | |
- | |
| 2477S | |
|
||
| i3 Keypad | KP014 | |
|
|
| Dimmer Keypad (6-Button or 8-Button) |
2486D | |
- | |
| 2334-222 | |
|
||
| On/Off Keypad (6-Button or 8-Button) |
2486S | |
|
|
| 2334-232 | |
|
||
| Dimmer Outlet | 2474DWH | |
|
|
| i3 Outlet | WR01 | |
|
- |
| On/Off Outlet (2014) | 2663-222 | |
|
|
| On/Off Outlet (2007) | 2473SWH | |
- | |
| Wired Thermostat | 2441TH | - | |
|
| Wireless Thermostat | 2441ZTH | - | |
|
| Thermostat Adapter | 2441V | - | |
|
| Mini Remote (Wireless Switch) |
2444A3 | - | |
|
| 2342-242 | - | |
||
| Mini Remote (4-Scene) |
2444A2WH4 | - | |
|
| 2342-232 | - | |
||
| Mini Remote (8-Scene) |
2444A2WH8 | - | |
|
| 2342-222 | - | |
||
| Wi-Fi Camera | 75790 | - | - | |
| 75790WH | - | - | ||
| HD Wi-Fi Camera | 2864-222 | - | - | |
| 2864-226 | - | - | ||
| Outdoor Wi-Fi Camera | 75791 | - | - | |
| HD Outdoor Wi-Fi Camera | 2864-232 | - | - | |
| Open/Close Sensor | 2421 | - | |
|
| 2843-222 | - | |
||
| Hidden Door Sensor | 2845-222 | - | |
|
| Motion Sensor | 2420M | - | |
|
| 2842-222 | - | |
||
| Leak Sensor | 2852-222 | - | |
|
| Smoke Bridge | 2982-222 | |
- | |
| IO Module | 2450 | |
- | |
| Ceiling Fan Controller | 2475F | |
|
|
| Dimmer Micro Module | 2442-222 | |
|
|
| On/Off Micro Module | 2443-222 | |
|
|
| Open/Close Micro Module | 2444-222 | |
|
|
| Ballast Dimmer | 2475DA2 | |
|
|
| Dimmer In-Line Module | 2475D | |
- | |
| 2475DA1 | |
|
||
| On/Off In-Line Module | 2475S2 | |
- | |
| 2475SDB | |
|
||
| 220V Load Controller | 2477SA1 | |
|
|
| 2477SA2 | |
|
||
| Dimmer DIN Rail Module | 2452-222 | |
|
|
| On/Off DIN Rail Module | 2453-222 | |
|
|
| MorningLinc | 2458A1 | |
- | |
| Lock Controller | 2862-222 | |
- | |
| IRLinc Transmitter | 2411T | |
- | |
| IRLinc Receiver | 2411R | |
- | |
| SeriaLinc | 2410S | |
- | |
| Access Point | 2443 | |
|
|
| Range Extender | 2992-222 | |
|
|
| Energy Display | 2448A2 | - | |
|
| iMeter Solo | 2423A1 | |
- | |
| SynchroLinc | 2423A5 | |
- |
English
Deutsch
Français
Italiano
Español